CLI commands you can issue to try and correct the problem in the short term.
# diag test application ipsmonitor
IPS Engine Test Usage: (Values for >
1: Display IPS engine information
2: Toggle IPS engine enable/disable status
3: Display restart log
4: Clear restart log
5: Toggle bypass status
6: Submit attack characteristics now
97: Start all IPS engines
98: Stop all IPS engines
99: Restart all IPS engines and monitor
The most common command that we issue to deal with the IPS Engine running high is the following which restarts the IPS process:
# diag test application ipsmonitor 99
# diag test application ipsmonitor
IPS Engine Test Usage: (Values for >
1: Display IPS engine information
2: Toggle IPS engine enable/disable status
3: Display restart log
4: Clear restart log
5: Toggle bypass status
6: Submit attack characteristics now
97: Start all IPS engines
98: Stop all IPS engines
99: Restart all IPS engines and monitor
The most common command that we issue to deal with the IPS Engine running high is the following which restarts the IPS process:
# diag test application ipsmonitor 99
I found this article VERY helpful;however, is there a better means of troubleshooting why IPS starts running at 100%? We've had this happen a few times in the passed week, and restarting the engine resolves the problem, but we would like to find a root cause.
ReplyDeleteWhat is the firmware version?
ReplyDeleteNice blog its superb blog to solve your problem firewall realted click it and get free from firewall error
ReplyDeletewindows firewall error 1068 windows 7
Thanks
Aalia lyon